XLPO

Product features:

This product has excellent 125℃, 150℃ temperature aging resistance, oil resistance, acid resistance, alkali resistance, strong surface wear resistance, high mechanical properties, low TVOC content, and performance meets the requirements of wire and cable TUV, DEKRA, COC, UL and other standards. Flame retardancy meets UL1581 VW-1, IEC60332-1 levels, and the series of products meet RoHS2.0, Reach, Halogen-free, PAHS, 23P-Free, PFOS & PFOA and other environmental protection requirements.

Application areas:

This series of products is often used to manufacture high-quality cable materials for high-temperature resistant electronic wires, new energy vehicle cables, charging pile cables, photovoltaic cables, etc.

Product Parameters

Physical properties	VALUE	Typical value	UNIT	Method
Density	1.0±0.05	1.05	g/cm³	ISO1183
Hardness	86±4	88	HA	ISO7619
Low temperature embrittlement Temperature	≤15/30	0/30	PCS()	ASTM-D746
Number of failures （-40℃）	-	-	-	-
Mechanical properties
Tensile strength (After irradiation)	≥12	14.3	MPa	GB/T1040
Elongation at break (After irradiation)	≥400	520	%	GB/T1040
Thermal extension 200C×0.2MPax15min Elongation under load	≤100	50	%	GB/T2951
Permanent elongation	≤15	5	%	GB/T2951
Aged properties 175℃C×240h/Winding/Uncracked
Winding	No crack	No crack	-	ISO6722
Withstand voltage breakdown	No breakdown	No breakdown	-	ISO6722
Aged properties 150C×3000h/Winding/Uncracked
Winding	No crack	No crack	-	ISO6722
Withstand voltage breakdown	No breakdown	No breakdown	-	ISO6722
Thermal shrinkage 150°C×15min/Contraction at any end	≤2	0.9	mm	ISO6722
Electrical performance
20℃ Volume resistivity	≥1.0×10^14	3.5×10^15	Ω·cm	ISO 14309
Dielectric strength	≥20	28	MV/m	DIN EN 6024
Flame retardant and combustion performance
Hydrogen halide gas content	≤5	0	mg/g	GB-T17650.1
PH value of combustion gas	≥4.3	5.8	-	GB-T17650.2
Combustion gas conductivity	≤10	5	μs/mm	GB-T17650.2
Flame retardant with single inclined angle of 45 degrees	-	Pass	-	ISO6722

ARE YOU INTERESTED IN OUR PRODUCT?

Why Don't You Contact Us

Application

150℃ XLPO Irradiation Cross-Iinked Halogen-Free Flame-Retardant Polyolefin Wire And Cable Material For New Energy Vehicle Cables

TPU New Energy Vehicle Charging Pile Charging Cable Cable Material

TPE New Energy Vehicle Charging Pile Cable Sheath Material，Charging Pile Wire Insulation Material

150℃ XLPO Irradiation Cross-Iinked Halogen-Free Flame-Retardant Polyolefin Wire And Cable Material For New Energy Vehicle Cables

150℃ XLPO Irradiation Cross-Iinked Halogen-Free Flame-Retardant Polyolefin Wire And Cable Material. This product is made of high-purity polyolefin resin as the base material, with high-quality and efficient flame retardants, cross-linking sensitizers, ant

TPU New Energy Vehicle Charging Pile Charging Cable Cable Material

TPU New Energy Vehicle Charging Pile Charging Cable Cable Material. 80℃ TPU charging pile cable sheath material is based on polyether polyurethane elastomer, added with high-efficiency flame retardant and other processing aids, and is made by mixing, plas

TPE New Energy Vehicle Charging Pile Cable Sheath Material，Charging Pile Wire Insulation Material

TPE New Energy Vehicle Charging Pile Cable Sheath Material，Charging Pile Wire Insulation Material. This charging pile sheath material is made of high-purity resin as the base material, and is mixed with halogen-free flame retardants, antioxidants, etc. an

News

Explore National High-tech Enterprises: Angreen | A Leader In Environmentally Friendly Macromolecule Wire And Cable Materials

Jul. 02, 2024

Founded in 2011, Angreen New Material Technology Co., Ltd. is a Chinese high-tech enterprise specializing in the research, development, production and sales of environmentally friendly, high-performance wire and cable materials.

Angreen New Materials helps the 2024 Asian Wire and Cable Industry Exhibition Summit Forum to be held smoothly

Jul. 09, 2024

From June 26 to June 28, 2024, the 2024 Asian Wire and Cable Industry Exhibition was officially launched at the China Import and Export Fair Complex in Guangzhou, and the 2024 Asian Wire and Cable Industry Exhibition Summit Forum series of activities were held.

Assisting green travel | Angreen New Materials launches a new generation of TPU/TPE charging pile cable sheaths and insulation materials

Jul. 16, 2024

In the tide of global energy transformation, the new energy vehicle industry has ushered in unprecedented development opportunities. In 2023, the Chinese automobile market will set a new record with a production of 30.161 million vehicles and a sales volume of 30.094 million vehicles.

FAQS

What are your main products?

Angreen's main products include XLPE, LSZH, LSOH, TPU, TPE, MPPE, and XLPO.
Do you have a research and development team?

Yes, Angreen has an experienced R&D team, including three PhDs in polymer chemistry, one postdoctoral fellow in chemistry and chemical engineering, and two specially appointed professors. We have strong research and development capabilities and independent patented technologies, with multiple R&D departments led by PhD-level talent. Angreen is also a designated postdoctoral research station by the Ministry of Human Resources and Social Security of China, Anhui Province Wire and Cable Materials Engineering Research and Development Center, a new product and technology cooperation base with East China University of Science and Technology, a graduate internship base with the University of Science and Technology of China, a polymer materials laboratory base with Tongji University, and a wire and cable materials industry-academia-research transfer base with Zhejiang University.
Can you produce custom products?

Yes, all of Angreen's products can be custom-designed and manufactured to meet your application needs and product directions effectively and reasonably.