Fumed Silicone Rubber Material for UL Electronic Wires-210℃-1440H

Features

-Peroxide / platinum sulfation

-Excellent electrical insulation performance and stable mechanical properties

-Compliance with the ROHS REACH FDA specifications

-Excellent aging performance

-Good processability, free from extrusion- induced bubbles

Material NO.:	PHQNC60-2U
PROPERTIES	VALUE	Typical Value	UNIT	Method
PHYSICAL PROPERTIES（Before aging）
Color	—	Light yellow or white	—	—
Hardness,Shore A	60±5	60	Shore A	GB/T 531.1
Plasticity	250±30	232	—	GB/T 12828
Density	1.20±0.03	1.18	g/cm^3	GB/T 533
Tensile Strength	≥8	8.6	MPa	GB/T 528
Tensile Elongation@break	≥400	585	%	GB/T 528
Tear Strength	≥30	48	kN/m	GB/T 529
Oxygen Index	≥26	27	—	GB/T 10707
SHORT TERM THERMAL AGING (200℃, 240h)
Tensile Strength	≥6.5	7.2	MPa	ISO 19642
Tensile Elongation@break	≥240	331	%	ISO 19642
SHORT TERM THERMAL AGING (210℃, 1440h)
Tensile Strength	≥3.45	5.4	MPa	UL 1581
Tensile Strength Rentention Rate	≥60	63	%	UL 1581
Tensile Elongation@break	≥50	183	%	UL 1581
Tensile Elongation@break Rentention Rate	≥25	31	%	UL 1581
WIRE LONG TERM THERMAL AGING (180℃,3000H)
Winding Test	No cracking	No cracking	—	ISO 19642
Withstand Voltage	No breakdown	No breakdown	—	ISO 19642
ELECTRICAL PROPERTIES
Volume Resistivity	≥10^15	1.9×10^16	Ω·cm	GB/T 1692
Breakdown strength	≥24	28	kV/mm	GB/T 1695
OPERATING CONDITION
Operating temperature	–50℃ ~ 200℃
Long term use humidity	5% ~ 90%

Platinum Catalysis: 120℃*10min.

It meets the aging requirements of the 200℃ silicone rubber used for the insulation of type SA wires in UL1581, as well as the 200℃ silicone rubber used for the sheath or insulation described in Table 50.210 of UL1581.

Next Product Inquiry

ARE YOU INTERESTED IN OUR PRODUCT?

Why Don't You Contact Us

Products

Extruded Silicone Cable Material

It has good extrusion performance and anti-yellowing performance. It is suitable for electronics, high-temperature wires and cables produced by extrusion process,

Learn More

Moldable Silicone Cable Material

Precipitation extrusion rubber is mainly developed for extrusion. The raw material has good transparency, and the surface of the extruded product is smooth, dry and non-sticky.

Learn More

Application

TPU new energy vehicle charging pile cable material

TPE New Energy Vehicle Charging Pile Cable Material

XLPE Charging Pile Cable Insulation Material

125℃ VW-1 Energy Sorage Battery Cable Material

EN Locomotive Wire And Cable Sheath Material

National Standard Cross-linked Polyolefin Locomotive Wire And Cable Sheath Material

TPU new energy vehicle charging pile cable material

80℃ TPU charging pile cable sheath material is made of polyether polyurethane elastomer as the base material and mixed with other additives by extrusion and granulation. It is suitable for charging pile charging cables.

TPE New Energy Vehicle Charging Pile Cable Material

TPE charging pile sheath material uses high-purity resin as the base material, adds halogen-free flame retardants, antioxidants, etc., and is mixed and extruded into granules. It is commonly used for the outer sheath and insulation of charging pile chargi

XLPE Charging Pile Cable Insulation Material

This product is mainly made of XLPE material and is suitable for charging pile insulation cables in accordance with GB/T33594, EN50620 and other standards.

125℃ VW-1 Energy Sorage Battery Cable Material

125℃-UL94-VW1-XLPO energy storage battery connecting wire material is a new type of halogen-free flame retardant environmentally friendly material, suitable for all kinds of energy storage battery connecting wires.

EN Locomotive Wire And Cable Sheath Material

European standard cross-linked polyolefin high-speed rail locomotive wire and cable sheath material is mainly used for cables for high-speed rail, subway, train and other locomotives. This page mainly introduces its main parameters.

National Standard Cross-linked Polyolefin Locomotive Wire And Cable Sheath Material

The national standard high-speed rail locomotive cable sheath material is mainly used for various types of locomotive cables of Chinese standards, such as CRH series high-speed rail. This page mainly displays its basic parameters and application areas.

News/Blog

Angreen | Manufacturer of modified plastic cable granular materials

Jul. 02, 2024

Angreen Advanced Material Technology Co., Ltd., a high-tech enterprise in China, specializes in eco-friendly wire and cable materials, including LSZH, XLPE, TPU, TPE, and silicone. With cutting-edge R&D, global certifications, and applications in EVs, 5G, and more, Angreen leads innovation in polymer solutions.

Angreen helps the 2024 Asia Cable Exhibition to be held successfully

Jul. 09, 2024

From June 26 to June 28, 2024, the 2024 Asian Wire and Cable Industry Exhibition was officially launched at the China Import and Export Fair Complex in Guangzhou, and the 2024 Asian Wire and Cable Industry Exhibition Summit Forum series of activities were held.

TPU/TPE charging pile cable sheath and insulation material

Jul. 16, 2024

In the tide of global energy transformation, the new energy vehicle industry has ushered in unprecedented development opportunities. In 2023, the Chinese automobile market will set a new record with a production of 30.161 million vehicles and a sales volume of 30.094 million vehicles.