Silicone Rubber For New Energy Vehicle cables

The silicone materials used for new energy vehicle cables are primarily based on fumed silicone rubber. These products comply with standards such as ISO 19642, ISO 6722, and LV 216-2 regarding silicone materials for new energy vehicle wiring harnesses. They are suitable for manufacturing the sheath layers of high-voltage cables for new energy vehicles.

Gas Phase Mixed Silicone Gel for NEV High Voltage Cable
Brand Number	\	Category	Silicone Rubber
Temperature Rating	180℃\190℃\200℃	Color	Transparent or white
Crosslinking Method	\
Appearance	Solid block	Processing Method	Extrusion
High-voltage cable sheathing for new energy vehicles. The product meets the requirements for silicone materials used in new energy vehicle wiring harnesses, such as ISO 19642, ISO 6722, and LV 216-2.

PROPERTIES	Typical value			UNIT	Method
PROPERTIES	180℃ PHQNC65-1E	190℃ PHQNC60-2E	200℃ PHQNC60-3E	UNIT	Method
PHYSICAL PROPERTIES（Before aging）
Color	Transparent or white			—	—
VOC	1-2 Class	1-2 Class	1-2 Class	—	—
Hardness,Shore A	65	59	58-65	Shore A	GB/T 531.1
Density	1.19	1.17	1.183	g/cm^3	GB/T 533
Tensile Strength	10.3	10.3	9.5	MPa	GB/T 528
Tensile Elongation@break	632	736	662	%	GB/T 528
Tear Strength	52	48.6	49	kN/m	GB/T 529
Oxygen Index	28	27	27	—	GB/T 10707
SHORT TERM THERMAL AGING (205℃, 240h)
Tensile Strength	8.1	6.3	6.5	MPa	GB/T 528
Tensile Elongation@break	386	354	262	%	GB/T 528
WIRE LONG TERM THERMAL AGING (180℃,3000h)
Winding Test	No Cracking	No Cracking	No Cracking	—	ISO 19642
Withstand Voltage	No Breakdown	No Breakdown	No Nreakdown	—	ISO 19642
ELECTRICAL PROPERTIES
Volume Resistivity	1.7×10^16	2.9×10^16	7.8×10^15	Ω·cm	GB/T 1692
Breakdown strength	28	29	25	kV/mm	GB/T 1695
Dissipation Factor(1kHz)	0.001	0.001	0.001	—	ASTM D150
Dielectric Constant(1kHz)	2.7	2.8	2.8	—	ASTM D150

News/Blog

Angreen | Manufacturer of modified plastic cable granular materials

Jul. 02, 2024

Angreen Advanced Material Technology Co., Ltd., a high-tech enterprise in China, specializes in eco-friendly wire and cable materials, including LSZH, XLPE, TPU, TPE, and silicone. With cutting-edge R&D, global certifications, and applications in EVs, 5G, and more, Angreen leads innovation in polymer solutions.

Angreen helps the 2024 Asia Cable Exhibition to be held successfully

Jul. 09, 2024

From June 26 to June 28, 2024, the 2024 Asian Wire and Cable Industry Exhibition was officially launched at the China Import and Export Fair Complex in Guangzhou, and the 2024 Asian Wire and Cable Industry Exhibition Summit Forum series of activities were held.

TPU/TPE charging pile cable sheath and insulation material

Jul. 16, 2024

In the tide of global energy transformation, the new energy vehicle industry has ushered in unprecedented development opportunities. In 2023, the Chinese automobile market will set a new record with a production of 30.161 million vehicles and a sales volume of 30.094 million vehicles.

FAQS

What Are Your Main Products?

Angreen Main Products
Angreen's main products include cross-linked polyolefins (XLPO), cross-linked polyethylene (XLPE) of various types of cross-linked materials, low smoke zero halogen (LSZH) series materials, thermoplastic polyurethane (TPU), thermoplastic elastomers (TPEs), silicone, EPDM, PVC and other materials.
Widely used in various wires, cables, optical fiber cables, UL cables, TUV cables and other fields, covering new energy vehicles, artificial intelligence, robots, rail transit, high-speed rail subways, equipment, ships, 5G optical communications, building decoration, photovoltaics, electricity, power generation, wind energy, mining, medical, ocean and other professional fields.
Do You Have A Research And Development Team?

Angreen Has A Senior And Professional R&D Team.
Yes, Angreen has a senior and experienced R&D team, including 3 PhDs in polymer materials, 1 postdoctoral fellow in chemistry and chemical engineering, and 2 specially appointed professors. It has strong experimental R&D capabilities and independent patented technologies, and has multiple R&D divisions, each of which is led by PhD leaders.
R&D departments include:
Low smoke and halogen-free materials division
TPE materials division
TPU materials division
New energy materials division
Silicone products division
Angreen has established in-depth cooperation with key universities and research institutions such as the University of Science and Technology of China, and has established a basic R&D laboratory in the laboratory of USTC. PhDs from USTC and corporate R&D technicians conduct preliminary research and development of various new products at home and abroad for various cutting-edge technologies, providing reliable R&D technical support for leading technologies.
At the same time, the company has a senior and experienced R&D team with strong experimental R&D capabilities and independent patented technologies, and has multiple R&D divisions, each of which is led by PhD leaders. In addition, we have established close cooperative relations with many national key laboratories of key universities and scientific research institutions such as the University of Science and Technology of China, and can provide comprehensive combustion experiments including large-scale combustion, B1, CPR, etc., a full range of performance and R&D demonstration tests, and all-round product R&D solutions.
Angreen is also a designated postdoctoral research workstation of the Ministry of Human Resources and Social Security, Anhui Province Wire and Cable Materials Engineering Technology Research Center, New Product and New Technology Cooperation Base of East China University of Science and Technology, Graduate Internship Base of University of Science and Technology of China, Polymer Materials Laboratory Base of Tongji University, and Industry-University-Research Transformation Base of Wire and Cable Materials of Zhejiang University.
Can You Produce Custom Products?

Yes, ll of Angreen's products can be custom-designed and manufactured to meet your application needs and product directions effectively and reasonably.
The Process Of Customizing Products Is As Follows
1. Customer Demand
Customers provide product requirements and technical parameters.

2. Customized R&D
Our R&D team develops products according to customer needs and provides corresponding physical properties and quotations.

3. Sample Production
If the physical properties and quotations meet customer expectations, our company will produce samples and send them to customers.

4. Customer Testing
Customers take samples for testing to check whether relevant performance meets product requirements.

5. Customer Confirmation
Customer test samples meet the requirements. If not, our company will continue to adjust parameters.

6. Mass Production
After obtaining customer confirmation, we immediately start mass production of products to ensure timely delivery.

7. Logistics Coordination
After the product is produced，we will ensure that the product is delivered safely and on time through professional logistics services.

8. Full Tracking
We monitor the entire logistics process to ensure that customers are aware of product dynamics at any time.

9. Professional Suggestions
Provide customers with the best manufacturing suggestions to improve their production efficiency and product quality.

Silicone Rubber For New Energy Vehicle cables

Angreen Main Products

Angreen Has A Senior And Professional R&D Team.

The Process Of Customizing Products Is As Follows