180℃ Silicone Rubber for EI111\EM106 High-voltage Cable

The silicone material for high-voltage cables is primarily based on fumed silicone rubber and features a temperature rating of 180°C. It is suitable for manufacturing high-voltage cables for road vehicles, with products meeting the requirements for 180°C silicone materials—such as EI111 and EM106—specified in standards including ISO19642, ISO6722, LV216-2, and EN50382. It is applicable for use as insulation in EI111/EM106 type cables.

180℃ Silicone Rubber Fumed Compound for EI111\EM106 High-Voltage Cable (Precipitated Silica Grade(EI111 EM106)
Brand Number	PHCNC65-1E	Category	Silicon Rubber
Temperature Rating	180℃	Color	Transparent
Crosslinking Method	\
Appearance	Block-shaped	Processing Method	Extrusion
Application Scope	Suitable for EI111/EM106 type cable insulation. Meets the requirements for 180°C silicone rubber materials used in wires and cables, such as EN50382 EI111 and EM106.

PHYSICAL PROPERTIES
Color	Transparent			/
VOC	/	1~2	/	/
Hardness,Shore A	65±5	65	Shore A	GB/T531.1
Density	1.19±0.02	1.19	g/cm3	GB/T533
Tensile Strength	≥9	10.3	MPa	GB/T528
Tear Strength	≥40	52	kN/m	GB/T529
Oxygen index	≥26	28	/	GB/T10707
SHORT TERM THERMAL AGING (205℃, 240h)
Tensile Strength	≥5	8.1	MPa	GB/T528
Tensile Elongation@break	≥200	386	%	GB/T528
WIRE LONG TERM THERMAL AGING (180℃,3000h)
Winding Test	No cracking	No cracking	/	ISO 19642
Withstand Voltage	No break	No break	/	ISO 19642
ELECTRICAL PROPERTIES
Volume Resistivity	≥1.0×10^15	1.7*10^16	Ω·cm	GB/T1692
Breakdown strength	≥24	28	kV/mm	GB/T1695
Dissipation Factor(1kHz)	/	0.001	/	ASTM D150
Dielectric Constant(1kHz)	/	2.7	/	ASTM D150
OPERATING CONDITION
Long term operating temperature	-50℃ ~ 180℃
Long term use humidity	5% ~ 90%
ENVIRONMENTAL REQUIREMENTS
Complies with RoHS and REACH environmental requirements.
Platinum catalysis:120C*8min The performance of the color products is different from the above typical values These properties are not to be construed as specifications, just for your consideration. The products meet the requirements of 180℃ silicone materials for cables specified in ISO19642,ISO6722,LV216-2 and EN50382 EI111 、EM106

News/Blog

Angreen | Manufacturer of modified plastic cable granular materials

Jul. 02, 2024

Angreen Advanced Material Technology Co., Ltd., a high-tech enterprise in China, specializes in eco-friendly wire and cable materials, including LSZH, XLPE, TPU, TPE, and silicone. With cutting-edge R&D, global certifications, and applications in EVs, 5G, and more, Angreen leads innovation in polymer solutions.

Angreen helps the 2024 Asia Cable Exhibition to be held successfully

Jul. 09, 2024

From June 26 to June 28, 2024, the 2024 Asian Wire and Cable Industry Exhibition was officially launched at the China Import and Export Fair Complex in Guangzhou, and the 2024 Asian Wire and Cable Industry Exhibition Summit Forum series of activities were held.

TPU/TPE charging pile cable sheath and insulation material

Jul. 16, 2024

In the tide of global energy transformation, the new energy vehicle industry has ushered in unprecedented development opportunities. In 2023, the Chinese automobile market will set a new record with a production of 30.161 million vehicles and a sales volume of 30.094 million vehicles.

FAQS

What Are Your Main Products?

Angreen Main Products
Angreen's main products include cross-linked polyolefins (XLPO), cross-linked polyethylene (XLPE) of various types of cross-linked materials, low smoke zero halogen (LSZH) series materials, thermoplastic polyurethane (TPU), thermoplastic elastomers (TPEs), silicone, EPDM, PVC and other materials.
Widely used in various wires, cables, optical fiber cables, UL cables, TUV cables and other fields, covering new energy vehicles, artificial intelligence, robots, rail transit, high-speed rail subways, equipment, ships, 5G optical communications, building decoration, photovoltaics, electricity, power generation, wind energy, mining, medical, ocean and other professional fields.
Do You Have A Research And Development Team?

Angreen Has A Senior And Professional R&D Team.
Yes, Angreen has a senior and experienced R&D team, including 3 PhDs in polymer materials, 1 postdoctoral fellow in chemistry and chemical engineering, and 2 specially appointed professors. It has strong experimental R&D capabilities and independent patented technologies, and has multiple R&D divisions, each of which is led by PhD leaders.
R&D departments include:
Low smoke and halogen-free materials division
TPE materials division
TPU materials division
New energy materials division
Silicone products division
Angreen has established in-depth cooperation with key universities and research institutions such as the University of Science and Technology of China, and has established a basic R&D laboratory in the laboratory of USTC. PhDs from USTC and corporate R&D technicians conduct preliminary research and development of various new products at home and abroad for various cutting-edge technologies, providing reliable R&D technical support for leading technologies.
At the same time, the company has a senior and experienced R&D team with strong experimental R&D capabilities and independent patented technologies, and has multiple R&D divisions, each of which is led by PhD leaders. In addition, we have established close cooperative relations with many national key laboratories of key universities and scientific research institutions such as the University of Science and Technology of China, and can provide comprehensive combustion experiments including large-scale combustion, B1, CPR, etc., a full range of performance and R&D demonstration tests, and all-round product R&D solutions.
Angreen is also a designated postdoctoral research workstation of the Ministry of Human Resources and Social Security, Anhui Province Wire and Cable Materials Engineering Technology Research Center, New Product and New Technology Cooperation Base of East China University of Science and Technology, Graduate Internship Base of University of Science and Technology of China, Polymer Materials Laboratory Base of Tongji University, and Industry-University-Research Transformation Base of Wire and Cable Materials of Zhejiang University.
Can You Produce Custom Products?

Yes, ll of Angreen's products can be custom-designed and manufactured to meet your application needs and product directions effectively and reasonably.
The Process Of Customizing Products Is As Follows
1. Customer Demand
Customers provide product requirements and technical parameters.

2. Customized R&D
Our R&D team develops products according to customer needs and provides corresponding physical properties and quotations.

3. Sample Production
If the physical properties and quotations meet customer expectations, our company will produce samples and send them to customers.

4. Customer Testing
Customers take samples for testing to check whether relevant performance meets product requirements.

5. Customer Confirmation
Customer test samples meet the requirements. If not, our company will continue to adjust parameters.

6. Mass Production
After obtaining customer confirmation, we immediately start mass production of products to ensure timely delivery.

7. Logistics Coordination
After the product is produced，we will ensure that the product is delivered safely and on time through professional logistics services.

8. Full Tracking
We monitor the entire logistics process to ensure that customers are aware of product dynamics at any time.

9. Professional Suggestions
Provide customers with the best manufacturing suggestions to improve their production efficiency and product quality.

180℃ Silicone Rubber for EI111\EM106 High-voltage Cable

Angreen Main Products

Angreen Has A Senior And Professional R&D Team.

The Process Of Customizing Products Is As Follows